Lines

Here you can select which extensions will be made available in the network.

A line usually corresponds to a telephone or a ProCall as a softphone. In the list all lines are displayed, which are available on the computer. The lines are made available by SIP Line Registrations or as TAPI lines.

estos UCServer supports the connection to a PBX. A table with the released PBXs can be found on the web pages.

With the button "Select telephone system" you can set up the connection to your telephone system to control the telephones via ProCall and/or to use ProCall as softphone.

To control the phones a TAPI or CSTA connection is needed. The ECSTA supplied by estos ProCall can be set up when added. For information on the requirement in your PBX and how to set up the ECSTA, see "Setting up ECSTA".

Manufacturer supplied TAPI drivers must already be installed on the system. If you add a new driver under Control Panel - Phone and Modem Options, the lines are added here accordingly. With some TAPI drivers a restart of the estos UCServer is necessary for this.

To use the ProCall as a softphone, the connection must be set up via SIP.

The configuration of the lines and line groups depends on the type of line.

• TAPI lines
• SIP Lines