Advanced Configuration- Headline and Logo

By default, a so-called fax header should be printed on every fax to be sent.

The fax header should contain data / time as well as the sender as text and the fax sender ID:

The fax header consists of information from the ISDN-board / VoIPconnect module / Funkwerk Router and ixi-UMS software.

Name and sender number are passed on to the CAPI-interface (e.g. ISDN-board) by the ixi-UMS Kernel. Date and time are inserted by it.

When deploying a Funkwerk ISDN-Router you can determine, whether and which of the information shall appear in the header generally.

Please proceed as in the following:

1.Open the web-interface of the Funkwerk Router and log on.

2.Change the view from Standard to SNMP-Browser

3.Open the tab capi in the menu bar on the left side

4.Open the sub item capiConfigTable in the tab capi

logo_header

The header as well as the Funkwerk / Bianca fax logo are displayed

No_Logo (Empfohlen)

The bintec elmeg / Bianca is switched off. The header consisting of date / time from the router and the sender information from the ixi-UMS Kernel are displayed.

Note:

If no sender information are deposited at the ixi-UMS Kernel or delivered by the sender, only date and time are displayed in the header:

No_header

Neither date / time, nor any other information are printed with the sending.

7.Confirm the configuration with OK.

8.Save the configuration so that it is available when the router has to be restarted.