Default Sender and Recipient

At the tab "Default Sender and Recipient", the default information must be entered.

Allgemein2

Default Recipient:

The fax number of the default recipient in SAP must be entered here. This field must not be left empty, as otherwise sending reports might not be delivered correctly. The ixi-UMS SI CON Connector delivers all the incoming, undelivered faxes or enhanced status-reports to the address of the <Default Recipient>.

In the inbox of the default recipient, the undelivered faxes can be recognized by means of the subject: Undeliverable to <number the fax should have been delivered to>

Default Sender:

If no sender ID is transferred by the user, the number stated here is entered as sender of the message (Mail From).

The sending report is delivered to this number.

The ixi-UMS Kernel does not receive a fax sender number by this.

Default Fax Sender ID:

When the default sender stated above is entered with a message without sender, no fax sender number is detected from this. As fax sender number, the call number entered here is used.

Calling Party Number:

It must be determined from which information the Calling Party Number ("D-Channel-Info" = "ISDN-Sender ID") shall be detected.

From sender address:	The fax sender number - just like the Calling Party Number - is created from the sender information (only practicable if the complete location information can be entered as "Kernel sender number" on the tab "General").
Always use:	The extension entered here is valid as Calling Party Number for all the users.
Suppress:	No Calling Party Number is transmitted to the PBX.

Remark:

The Calling Party Number has nothing to do with the fax sender ID and should only be entered if this is required by the PBX.

Version 8.00