Routing

In order to be able to set up the routing, all the required locations have to be installed.Outgoing messages can be routed based on the following information, depending on the service:

 

RCPT TO:

Recipient number: Please note that the service to be used (SMS, Voc etc.) is part of the addressing and must be entered here as well (e.g. SMS#+4917*)

MAIL FROM:

Sender of the message. Depending on the ixi-UMS Connector, this is an e-mail address (ixi-UMS Mail Server Connector) or a fax sender number (e.g. ixi-UMS Connector for use with SAP® R/3®)

Individual setting,

below: X-IFAXDATA-DChID

A field determined at "Advanced" with information you can determine freely

 

Via the button "Add", a form is opened that provides the possible options.

The Routing Filed has to be selected and the Criterion has to be entered. After that, a location has to be chosen to that a message, which fulfills this criterion, shall be transferred.

 

RoutingNeu

 

The rules are processes from the top to the bottom. It is mandatory to get the entries in the right order. The processing of the rules is finished when the entry * is reached.

 

In the following example it is first checked if it is an SMS.

If not, the message is first checked for the recipient. Only if the recipient number does not start with +43/0043 or +49/0049, the specified header field is read. If there is no +43 number, the sender of the message will be read.

If @firma.de or @firma.at is not part of the sender, the message will be transferred to the location "Germany" using the criterion "*".

 

Routing

 

The last entry is not analyzed. If it should be anylized, too, you would have to move it upwards via the up-arrow button.

 

Version 8.00