Requirements

Installation and Operation

uaCSTA Server for SIP Phones and ECSTA for SIP Phones can be used on 32- & 64-bit Windows® operating systems. Both products can be installed on the same computer. If other SIP applications have been installed on the computer on which the server should be installed, the usage of the default SIP and SIPTLS ports (5060 & 5061) must be checked. If these ports are already in use, you will have to use other ports available.

Supported Operating Systems:

Windows® 10 64bit
Windows® 11 64bit
Windows Server® 2016
Windows Server® 2019
Windows Server® 2022

Communication with Telephones

In order that uaCSTA Server for SIP Phones can communicate with the telephones, they will have to be registered with the server. To do this, a SIP identity, through which the telephone will be registered with the server, must be configured on each telephone to be controlled. These settings can be stored in the telephone through the Provisioning dialog integrated into the Administrator. As soon as the telephone registers itself with the server, it can be monitored and controlled. Environments in which the telephones are found in a VLAN or physically separated network are supported. To do this, the server must be integrated into this network using a network interface. You will find detailed information about the configuration of the IP interface and the login information in the settings for the Telephone Connection.

Communications with ECSTA for SIP Phones

ECSTA for SIP Phones will contact the server analogously to the telephones. Here too, the client must be able to contact the server. You will find detailed information about the configuration of the IP interfaces and the login information in the settings for the Client Connection.

Supported Telephones and Features

Auerswald
COMfortel 1400 IP, COMfortel 2600 IP, COMfortel 3600 IP
Auerswald: From Firmware Version 2.8 A

Supported CSTA Features (associative events are supported correspondingly):

CSTA Feature	Description	supported
MakeCall	Makes phone calls	yes
AnswerCall	Answer call	yes
ClearConnection	Terminate phone call	yes
HoldCall	Hold call	yes
RetrieveCall	Retrieve phone call on hold	yes
AlternateCall	Switch between the active phone call and the call on hold	Not supported, but emulated using the HoldCall & RetrieveCall functions.
ConferenceCall	Combine the active phone call with the call on hold to create a conference call.	yes
TransferCall	Connects the active phone call and the call on hold.	yes
GenerateDigits	Dials DTMF tones.	yes
DialDigits	Dials the digital tones for a phone call.	Not supported
ConsultationCall	Initiates a callback call.	yes
SingleStepTransferCall	Transfers an active call blindly	yes
DeflectCall	Redirects calls	yes
DirectedPickupCall	Picks up a call from another participant	Not supported
GetDoNotDisturb	Checks the Do Not Disturb indicator.	yes
SetDoNotDisturb	Sets the Do Not Disturb indicator.	yes
GetForwarding	Checks for forwarded phone numbers.	yes
SetForwarding	Sets up call forwarding.	yes
MonitorStart	Starts monitoring the telephone.	yes
MonitorStop	Stops monitoring the telephone.	yes
GetSwitchingFunctionDevices	Checks the configured identities.	yes
SnapShotDevice	Consistency check	yes
SnapShotCall	Consistency check	Not supported
SystemRegister	Subscribes to notifications of configuration changes.	yes
SystemRegisterCancel	Unsubscribes from notifications for configuration changes.	yes
RequestSystemStatus	Checks the telephone status.	yes

Mitel
6863i, 6865i, 6867i, 6869i
Mitel: From FirmwareVersion 4.1.0 Service Pack 2

Supported CSTA Features (associative events are supported correspondingly):

CSTA Feature	Description	supported
MakeCall	Makes phone calls	yes
AnswerCall	Answer call	yes
ClearConnection	Terminate phone call	yes
HoldCall	Hold call	yes
RetrieveCall	Retrieve phone call on hold	yes
AlternateCall	Switch between the active phone call and the call on hold	Not supported, but emulated using the HoldCall & RetrieveCall functions.
ConferenceCall	Combine the active phone call with the call on hold to create a conference call.	yes
TransferCall	Connects the active phone call and the call on hold.	yes
GenerateDigits	Dials DTMF tones.	yes
DialDigits	Dials the digital tones for a phone call.	Not supported
ConsultationCall	Initiates a callback call.	yes
SingleStepTransferCall	Transfers an active call blindly	yes
DeflectCall	Redirects calls	yes
DirectedPickupCall	Picks up a call from another participant	Not supported
GetDoNotDisturb	Checks the Do Not Disturb indicator.	yes
SetDoNotDisturb	Sets the Do Not Disturb indicator.	yes
GetForwarding	Checks for forwarded phone numbers.	yes
SetForwarding	Sets up call forwarding.	yes
MonitorStart	Starts monitoring the telephone.	yes
MonitorStop	Stops monitoring the telephone.	yes
GetSwitchingFunctionDevices	Checks the configured identities.	yes
SnapShotDevice	Consistency check	yes
SnapShotCall	Consistency check	yes
SystemRegister	Subscribes to notifications of configuration changes.	Not supported
SystemRegisterCancel	Unsubscribes from notifications for configuration changes.	Not supported
RequestSystemStatus	Checks the telephone status.	yes

snom
D3xx Serie, D7xx Serie, 300, 320, 360, 370, 720, 760, 820, 821, 870, D120* (*For D120 No Auto Provisioning)
snom: From Firmware Version 8.7.5.13

Supported CSTA Features (associative events are supported correspondingly):

CSTA Feature	Description	supported
MakeCall	Makes phone calls	yes
AnswerCall	Answer call	yes
ClearConnection	Terminate phone call	yes
HoldCall	Hold call	yes
RetrieveCall	Retrieve phone call on hold	yes
AlternateCall	Switch between the active phone call and the call on hold	Not supported, but emulated using the HoldCall & RetrieveCall functions.
ConferenceCall	Combine the active phone call with the call on hold to create a conference call.	yes
TransferCall	Connects the active phone call and the call on hold.	yes
GenerateDigits	Dials DTMF tones.	yes
DialDigits	Dials the digital tones for a phone call.	Not supported
ConsultationCall	Initiates a callback call.	yes
SingleStepTransferCall	Transfers an active call blindly	yes
DeflectCall	Redirects calls	yes
DirectedPickupCall	Picks up a call from another participant	Not supported
GetDoNotDisturb	Checks the Do Not Disturb indicator.	yes
SetDoNotDisturb	Sets the Do Not Disturb indicator.	yes
GetForwarding	Checks for forwarded phone numbers.	yes
SetForwarding	Sets up call forwarding.	yes
MonitorStart	Starts monitoring the telephone.	yes
MonitorStop	Stops monitoring the telephone.	yes
GetSwitchingFunctionDevices	Checks the configured identities.	yes
SnapShotDevice	Consistency check	yes
SnapShotCall	Consistency check	Not supported
SystemRegister	Subscribes to notifications of configuration changes.	yes
SystemRegisterCancel	Unsubscribes from notifications for configuration changes.	yes
RequestSystemStatus	Checks the telephone status.	yes

Yealink
VP59, SIP-T58V, SIP-T58A, SIP-T56A, T57W, T54W, T53W, T53, SIP-T54S, SIP-T52S, SIP VP-T49G, T4S, SIP-T48G, SIP-T46G, SIP-T42G, SIP-T41P, SIP-T40G, SIP-T40P, SIP-T29G, SIP-T27G, SIP-T23G, SIP-T23P, SIP-T27P
Yealink: From Firmware Version x.81.0.15

Supported CSTA Features (associative events are supported correspondingly):

CSTA Feature	Description	supported
MakeCall	Makes phone calls	yes
AnswerCall	Answer call	yes
ClearConnection	Terminate phone call	yes
HoldCall	Hold call	yes
RetrieveCall	Retrieve phone call on hold	yes
AlternateCall	Switch between the active phone call and the call on hold	Not supported, but emulated using the HoldCall & RetrieveCall functions.
ConferenceCall	Combine the active phone call with the call on hold to create a conference call.	yes
TransferCall	Connects the active phone call and the call on hold.	yes
GenerateDigits	Dials DTMF tones.	yes
DialDigits	Dials the digital tones for a phone call.	Not supported
ConsultationCall	Initiates a callback call.	yes
SingleStepTransferCall	Transfers an active call blindly	yes
DeflectCall	Redirects calls	yes
DirectedPickupCall	Picks up a call from another participant	Not supported
GetDoNotDisturb	Checks the Do Not Disturb indicator.	yes
SetDoNotDisturb	Sets the Do Not Disturb indicator.	yes
GetForwarding	Checks for forwarded phone numbers.	yes
SetForwarding	Sets up call forwarding.	yes
MonitorStart	Starts monitoring the telephone.	yes
MonitorStop	Stops monitoring the telephone.	yes
GetSwitchingFunctionDevices	Checks the configured identities.	yes
SnapShotDevice	Consistency check	yes
SnapShotCall	Consistency check	Not supported
SystemRegister	Subscribes to notifications of configuration changes.	Not supported
SystemRegisterCancel	Unsubscribes from notifications for configuration changes.	Not supported
RequestSystemStatus	Checks the telephone status.	ja

Polycom
VVX 201, VVX 301/311, VVX 401/411, VVX 501, VVX 601, VVX x50-Serie, CCX-Serie
Polycom: From Firmware Version 6.1.0.6189

Supported CSTA Features (associative events are supported correspondingly):

CSTA Feature	Description	supported
MakeCall	Makes phone calls	yes
AnswerCall	Answer call	yes
ClearConnection	Terminate phone call	yes
HoldCall	Hold call	yes
RetrieveCall	Retrieve phone call on hold	yes
AlternateCall	Switch between the active phone call and the call on hold	Not supported, but emulated using the HoldCall & RetrieveCall functions.
ConferenceCall	Combine the active phone call with the call on hold to create a conference call.	yes
TransferCall	Connects the active phone call and the call on hold.	yes
GenerateDigits	Dials DTMF tones.	Not supported
DialDigits	Dials the digital tones for a phone call.	Not supported
ConsultationCall	Setup transfer	yes
SingleStepTransferCall	Transfers an active call blindly	yes
DeflectCall	Redirects calls	yes
DirectedPickupCall	Picks up a call from another participant	Not supported
GetDoNotDisturb	Checks the Do Not Disturb indicator.	Not supported
SetDoNotDisturb	Sets the Do Not Disturb indicator.	Not supported
GetForwarding	Checks for forwarded phone numbers.	yes
SetForwarding	Sets up call forwarding.	yes
MonitorStart	Starts monitoring the telephone.	yes
MonitorStop	Stops monitoring the telephone.	yes
GetSwitchingFunctionDevices	Checks the configured identities.	yes
SnapShotDevice	Consistency check	yes
SystemRegister	Subscribes to notifications of configuration changes.	Not supported
SystemRegisterCancel	Unsubscribes from notifications for configuration changes.	Not supported
RequestSystemStatus	Checks the telephone status.	yes

Gigaset
Base station: N870 IP PRO; Devices: R650H PRO und SL750H PRO
Gigaset Base station: Firmware Version 2.39.0

The Gigaset base station only provides a very limited scope of CSTA functions. Supported CSTA functions:

CSTA Function	Description	Support
MakeCall	Makes phone calls	yes
AnswerCall	Answer call	yes
ClearConnection	Terminate phone call	Either from the connection status or while the connection is being established, but then only on the part of the calling subscriber.
HoldCall	Hold call	Not supported
RetrieveCall	Retrieve phone call on hold	Not supported
AlternateCall	Switch between the active phone call and the call on hold	Not supported
ConferenceCall	Combine the active phone call with the call on hold to create a conference call.	Not supported
TransferCall	Connects the active phone call and the call on hold.	Not supported
GenerateDigits	Dials DTMF tones.	Not supported
DialDigits	Dials the digital tones for a phone call.	Not supported
ConsultationCall	Setup transfer	Not supported
SingleStepTransferCall	Transfers an active call blindly	Not supported
DeflectCall	Redirects calls	Not supported
DirectedPickupCall	Picks up a call from another participant	Not supported
GetDoNotDisturb	Checks the Do Not Disturb indicator.	yes
SetDoNotDisturb	Sets the Do Not Disturb indicator.	yes
GetForwarding	Checks for forwarded phone numbers.	Not supported
SetForwarding	Sets up call forwarding.	Not supported
MonitorStart	Starts monitoring the telephone.	yes
MonitorStop	Stops monitoring the telephone.	yes
GetSwitchingFunctionDevices	Checks the configured identities.	yes
SnapShotDevice	Consistency check	yes
SystemRegister	Subscribes to notifications of configuration changes.	Not supported
SystemRegisterCancel	Unsubscribes to notifications of configuration changes.	Not supported
RequestSystemStatus	Checks the telephone status.	yes

Version 7.0