Access

Here it is set whether the ISDN-controller is connected via a point-to-multipoint access or a point-to-point access.

Please keep in mind the data in the PBX configuration sheet filled out by the PBX-technician

isdnAllPerpAccess_en

Point-to-Multipoint (PMP)

Please choose this setting if the ixi-UMS Kernel is connected to a point-to-multipoint access (of the PBX).

Point-to-Point (PP)

Please choose this setting if the ixi-UMS Kernel is connected to a point-to-point )access of the PBX).

Internal Code

Please enter the main number here, provided that it is transferred by the PBX.

Number of Direct Dialing Digits

When a point-to-point access is selected here, the maximum number of extension digits MUST be stated here.

When 3-digit and 4-digit extensions are used, you have to enter 4 here.

Suppress Calling Party Number

If this check box is marked, ixi-UMS transfers to the CAPI with an outgoing call, that no call number (ISDN-identification / CLIP) shall be sent. The PBX and the connection must support this feature.

(With ISDN: according to ETS 300 102/Q.931, the Byte 3a element of the "Calling party number information" is set; this is converted by the XCAPI according to RFC 3323)