To use the estos UCServer with a terminal server or Citrix® Metaframe, first install the server as described in Installation.
In contrast to TapiServer 2.x, with estos UCServer no TAPI drivers are required for estos ProCall in Terminal Server environments. You only have to install the multi-line TAPI driver if other applications use TAPI. |
If you have installed a further application which uses TAPI please observe the following instructions:
estos UCServer ist auf dem Terminal Server installiert
If the estos UCServer is installed on the terminal server, no remote TAPI driver is used. The lines which are made available to the telephone system by the TAPI driver can be viewed and used by all users. The estos UCServer has the task to allocate lines to the users.
estos UCServer ist nicht auf dem Terminal Server installiert
If the estos UCServer is installed on another server, then the Multiline TAPI driver is installed on the terminal server. In the Computer configuration all lines are assigned to the Multiline TAPI driver which are needed by the terminal server users. These lines are then visible for all users and the right line is always used for the registered user.
Jeder Benutzer verwendet den Terminal Server von seinem festen Arbeitsplatz aus
In this case every user can have his own phone assigned to them. Every user is the owner of his phone which stands next to his workstation.
Jeder Benutzer verwendet den Terminal Server wahlweise von einem beliebigen Arbeitsplatz aus
Users do not have their own number:
In this case users are not assigned their own lines. Phones are assigned to the computers which they are standing next to. If a user logs on to the terminal server from a workstation they are assigned the phone standing next to that workstation.
Every user has his own number:
In this case every user can have his own phone assigned to him. The user can then either take his (cordless) phone with him to his workstation or log on to a phone so that their number is available there.
Version 8.3