The devices must be set up and provisioned in the estos GmbH telephone system. After the device has been set up, it can be assigned to a user.
When the phone device is restarted, it is provisioned and automatically receives the assigned phone number.

Basically, autoprovisioning automatically gives the phones the following features:

  • SIP account (registration of the phone with the PBX)
  • Access data to protect the telephone configuration
  • Function keys
  • Language files
  • STARFACE user menu for the phone display
  • Firmware updates

Please also refer to the estos GmbH web pages for the latest information on setting up the endpoints.

uaCSTA settings

If you have installed an estos ECSTA for SIP Phones, you can enter the required connection data for the phones with provisioning.
Please note that the "Server" must be an address that can be reached from all phone devices. The password for the login, which you have defined in ECSTA for SIP phones, must be entered here.

Enter phone devices

Click "Add" to register a new device.

The name of the device can be freely selected and is displayed when it is assigned to a user object. The name cannot be changed after adding the device.

Select the type of terminal device. Depending on the selection, the data required for registration will be requested.

MAC address For registering snom and Yealink terminals.
The MAC address of the end device must be entered
Gigaset DECT Master To register a Gigaset DECT Master .
The MAC ID must be entered
DECT handset To register a Gigaset DECT terminal.
The IPUI must be specified.
This option is only available after successful provisioning of a Gigaset Master.
If the handset is successfully entered, it is visible in the web interface of the DECT system.

DECT Master
This option is only displayed when adding a DECT handset. If several DECT systems are entered, the correct master must be selected here.

Provision desk phones
By "accepting" the entered devices, the information is transferred to the provisioning service and the phone device can be assigned to a user object.

After entering the snom and Yealink endpoints, accepting the entries (sending them to the provisioning service) and assigning them to a user, the endpoints must be (re)started.
The end devices receive new firmware and the software to use the available settings.

Please note:
The following requirements must be met so that the end devices can be used with ProCall Voice Services and all Voice Services functions are available:
  • The phone device must be set up in the UCServer.
  • The phone device must be assigned to a user object.
  • At least 1 phone number must be assigned to the terminal.
  • The phone device must be (re)started.
Make sure that the new firmware is installed on the device. Otherwise, the ProCall Voice Services functions will not be available.

Set up DECT system
The DECT master must be restarted once after entering in UCServer.
After successful provisioning, the handsets can be entered in UCServer using "Add" - DECT Handset".
The handsets added in this way are automatically entered in the DECT master and managed there.

In the next step, the handsets must be registered in the DECT system. Via the context menu in UCServer you can start the "Logon mode" in the master.

Overview - phone devices

The overview shows to which user the device has been assigned and the status of the device.

Status Meaning
Online The device has been successfully provisioned and registered with the telephone system.
Offline The device has been provisioned successfully, but has not been registered with the telephone system.
Provisioning The Mac® address / UID has been successfully sent to the provisioning server.
MAC address already registered The MAC address entered already exists on the provisioning server. To provision the end device again, it must first be deleted.
Error received from phone provider MAC address / UID could not be passed to the provisioning server. contact estos GmbH support.
Error registering device Error registering the terminal device to the PBX.If re-registering the terminal device is not successful, contact estos GmbH support.
No provider mapping for this device There is no provider for the provisioning of the terminal.
unknown The status is unknown.
The status is displayed if the terminal device is not entered in the telephone system (offline, online).
Errors during provisioning are currently only displayed as long as the "End Devices" window is open.
After switching windows, the status cannot be displayed again.
Registration This status is displayed on a Gigaset DECT Master when it is in registration mode so that the DECT terminals can register with the station.
Please also refer to the notes on the estos GmbH web pages.

Version 8.2