Enter the lines that the Tapi driver should provide as Tapi lines. The number is the internal phone number, the device-ID is the MAC address of the phone, the name will be used just for display. Optionally, each line may use additional line buttons from the phone as Tapi addresses. Enter the line buttons as semicolon seperated list of phone numbers (e.g. 9011;9012;9013).
Phone Number Format
The lines must be canonically specified, for example +493012345123.
In the dialogue Location You can configure the country code, area code and local dialing prefix.
Menu Extras
This menu contains the following additional actions.
Load Lines
The available lines can be read out from the platform. In the case of this query, the participants of a number range specified by you will be read out. To this end, enter the prefix for all the phone numbers (e.g. +4989444) and the range of the participants phone numbers (e.g. 100 - 200).
Manual addition of a line
Specify the international phone number of the telephone (e.g. +49894441000. Optionally, a name can also be specified.
Import text
You can import a list of lines from a text file. Each line must contain the phone number, name.
Export text
You may export the actual line configuration to a text file.
Attention
After the installation of the driver it may be necessary to restart the computer.
Version 6.0