Mitel MiVoice MX-ONE CSTA3 XML
When setting up the driver, follow these steps:
- Check the version of the PBX Firmware
The Firmware of the MX-ONE must be greater or equal to 5.0 SP5.
- Setup the CSTA server in the Mitel MiVoice MX-ONE
Open the configuration pages 'Services/CSTA Server'. Configure a CSTA Server and use the following settings:
| Protocol | XML |
| Port | 8882 |
| Heartbeat Option | Heartbeat support by external application |
| By-pass Option | No by-pass |
| Diversion Option | Allow diversion after deflect |
| Dialed Number Presentation Option | Do not replace dialed number |
| Connection View Option | Fixed View |
- Check network connection
If the connection is established using TCP/IP, check if you can reach the PBX system (ping hostname)
- Driver installation
See also Settings