Hardware Requirements:· Processor with more than 2000 MHz · 1 GB free Memory · minimum 100 MB of free hard disk space + at least 0.5 MB per announcement storage space · Network interface card · CAPI 2.0 compliant ISDN board, H.323 / SIP
Software requirements:·Windows 10 (32 / 64 bit ) ·Windows Server 2012/2012R2 ·Windows Server 2016 / 2019 ·at least ixi-Framework 7.0 installed ·at least ixi-UMS Kernel 7.0 installed
Telephone systemCall transfer requires special features on your ISDN board/PBX *
ISDN
Voice over IP When the features transfer / connect and/or callback shall be used, the following features must be supported in addition:
The service HOLD is needed to hold an active call in order to make the call transfer after having made a consultation call. Retrieve is needed when the consultation call or the call transfer was not successful in order to reactivate the held call. For more detailed information about the connection / configuration of the ixi-UMS VoIPconnect for your PBX, please turn to ixi-UMS support department.
Please see also "HowTo - Information about Call Transfer".
|
Version ixi-UMS_Enterprise_7.10