General VoIP (XCAPI)

Tracelevel=0

The tracelevel for the MWI-module is set here. This value is 0 by default and should only be changed upon advice of %Firma% GmbH.

0 = no trace,

1 to 250 trace with more or less details; recommended 0 or 200

;            e.g. Tracelevel=200

;            Default: 0

Compatmode=0

This value determines in which form the ixi-UMS Kernel processes the MWI messages. Basically, the option "Compatmode=0" should be selected. In this way, the MWI messages from the messaging system can easily be set with 1 or 0.

; Compatmode 1 = compatbility/emulation with/of Infotext/"Associated Services"

;                set infotext with 7568<Dest><InfoNum>

;                clear infotext with 7668<Dest><InfoNum>

;            0 = MWI mode

;                set MWI with 1<Dest>

;                clear MWI with 0<Dest>

Note: The Compatmode=1 is only used in special configurations

MakeCtrlUser=1

Method how ControllingUserNumber is made, Default = 1= no change, no ignore job

Here it is determined what the MWI module does with the job if no ISDN sender ID is deposited in the jobfile.

[CAPI]

CtrlNum=1

Number of ISDN Controller to be used; Default = 1

Here the wanted Controller needed for the setting of MWI messages is entered.