1. Products
  2. ProCall Business 7.4.1.5939
  3. UCServerBusiness
  4. Connecting the telephone system via ECSTA
  5. Set up telephone systems
  6. Panasonic KX-, NS Series
Back Next  PDF Download PDF

ECSTA for Panasonic

The estos ECSTA for Panasonic controls and monitors telephones on a Panasonic telephone system.
The connection to the telephone system is established using CSTA Phase III.
Connection occurs exclusively via LAN (TCP/IP).

Licenses are required in the telephone system for operation in a Panasonic telephone system:

  • KX-NS Series
    3rd Party CTI Link License (Activation Key: KX-NSF101 or KX-NSA020)
  • KX-NSX Series
    3rd Party CTI Link License (Activation Key: KX-NSXF004)
  • KX-NCP/TDE/TDA Series
    No 3rd Party CTI Link license is required

Informationen zum Einrichten des ECSTA for Panasonic finden unter ECSTA einrichten

estos ProCall supports connection to a telephone system and hence the creation of an instance.

Supported TAPI operations

The driver offers the following TAPI call control operations.

Action:Corresponding TAPI function:
DialTSPI_lineMakecall
Hang upTSPI_lineDrop
Answer callTSPI_lineAnswer
Hold callTSPI_lineHold
Retrieve callTSPI_lineUnhold
Redirect callTSPI_lineRedirect
Blind transferTSPI_lineBlindTransfer
Setup transferTSPI_lineSetupTransfer
Swap holdTSPI_lineSwapHold
Complete transferTSPI_lineCompleteTransfer (LINETRANSFERMODE_TRANSFER)
Create conferenceTSPI_lineCompleteTransfer (LINETRANSFERMODE_CONFERENCE)
Add to conferenceTSPI_lineAddToConference
Remove from conferenceTSPI_lineRemoveFromConference
PickupTSPI_linePickup
DTMF dialingTSPI_lineGenerateDigits
Dial in dial tone modeTSPI_lineDial
Callback busyTSPI_lineCompleteCall (LINECALLFEATURE2_COMPLCALLBACK)
Connection to an existing callTSPI_lineCompleteCall (LINECALLFEATURE2_COMPLINTRUDE)
ForwardingTSPI_lineForward TSPI_lineGetAddressStatus
  • LINEFORWARDMODE_UNCOND
  • LINEFORWARDMODE_UNCONDEXTERNAL
  • LINEFORWARDMODE_UNCONDINTERNAL
  • LINEFORWARDMODE_BUSY
  • LINEFORWARDMODE_BUSYEXTERNAL
  • LINEFORWARDMODE_BUSYINTERNAL
  • LINEFORWARDMODE_NOANSW
  • LINEFORWARDMODE_NOANSWEXTERNAL
  • LINEFORWARDMODE_NOANSWINTERNAL

The following TAPI functions are implemented due to requirements of the TAPI subsystem.

Other functions exported by the driver:
TSPI_lineSendUserUserInfo
TSPI_lineClose
TSPI_lineCloseCall
TSPI_lineConditionalMediaDetection
TSPI_lineDevSpecific
TSPI_lineDevSpecificFeature
TSPI_lineGetDevConfig
TSPI_lineSetDevConfig
TSPI_lineGetAddressCaps
TSPI_lineGetAddressStatus
TSPI_lineGetAddressID
TSPI_lineGetCallAddressID
TSPI_lineGetCallInfo
TSPI_lineGetCallStatus
TSPI_lineGetDevCaps
TSPI_lineGetExtensionID
TSPI_lineGetIcon
TSPI_lineGetID
TSPI_lineGetNumAddressIDs
TSPI_lineNegotiateExtVersion
TSPI_lineNegotiateTSPIVersion
TSPI_lineOpen
TSPI_lineSelectExtVersion
TSPI_lineSetDefaultMediaDetection
TSPI_lineSetStatusMessages
TSPI_lineSetAppSpecific
TSPI_lineSetCallData
TSPI_providerCreateLineDevice
TSPI_providerEnumDevices
TSPI_providerFreeDialogInstance
TSPI_providerGenericDialogData
TSPI_providerInit
TSPI_providerShutdown
TSPI_providerUIIdentify
TSPI_lineGetCallIDs
TUISPI_lineConfigDialog
TUISPI_lineConfigDialogEdit
TUISPI_providerConfig
TUISPI_providerInstall
TUISPI_providerRemove
TUISPI_providerGenericDialog
TUISPI_providerGenericDialogData

Super Twin Function
The driver has two addresses for each line. The second address contains the designation 'Mobile'. The second address is only used for lines that currently have a Super-Twin DECT device assigned.

Version 7.4.1.5939