General

Inbound

To be able to deliver the incoming message to the users and to enable them to reply to a fax, the incoming message must contain a correctly formatted phone number as recipient and sender, e.g. +49 8142 4799666.

Depending on what the PBX transmits to the ixi-UMS Kernel, this numbermight be displayed incorrectly, e.g. +49 8142 08142 4799666 or +8142 4799666

Here, the area code or the outside line access incoming would have to be removed in order to render the call number in the correct format.

ex_yellow_sm

Please note that the conversion of the "Calling Party Number" depends on the address information transferred by the PBX and also evaluates the ToN.

Rufnummer-Umwandlung

Outbound

If the phone number begins in the outgoing UMS-message with + (e.g +390254789) this is shortened normally on grounds of the server site information. After this the "outside line access" is added.

In some countries, the area code has to be dialed also with local calls. In this case, it must activate "Dieal alway national access and area code".

Is to be followed with this setting, how the phone numbers in int. Format addressed / are shown:

e.g. Italien:

national = local shown: 02 64489945

national = local shown: +3902644899 -> the "National AccessCode" 0 is a component of the phone number

In the Server Site must be put down 02 as a "Area Code" and the "National Access Code" must be empty

e.g. Belgien:

national = local shown: 083 64489945

national = local shown: +3983644899 -> the "National AccessCode" 0 is not a component of the phone number

In the Server Site must be put down 83 as a "Area Code" and in the "National Access Code" must must be put down 0

Version ixi-UMS_Enterprise_7.10