Connection Type

These settings are only required if you are using a Bintec elmeg Remte-Capi (ISDN). In this case, you must specify which connection type is set up in the telephone system and the Bintec elmeg device.

Basis_HardwareAnschluss

The connection type must be the same for all controllers.

Point-to-Multipoint (PMP)

Please choose this setting if ixi-UMS Business is connected to a point-to-multipoint access (of the PBX).

Point-to-Point (PP)

Please choose this setting if ixi-UMS Business is connected to a point-to-point )access of the PBX).

Internal Code

Please enter the main number here, provided that it is transferred by the PBX.

Number of Direct Dialing Digits

When a point-to-point access is selected here, the maximum number of extension digits MUST be stated here.

When 3-digit and 4-digit extensions are used, you have to enter 4 here.

Version ixi-UMS_6_Business_SR3