Rules can be deposited, by means of that incoming and outgoing destinations are converted. Therewith, for example with networked PBX's, messages with a certain area code can be sent via a PBX at another site.
See also "Additional Features - Number Conversion"
![Rufnummer-RufNumKonf](rufnummer-rufnumkonf.png)
|
The rules have to be determined separately for "incoming" and "outgoing" Fax, SMS and MWI Messages.
Please note that the "first hit strikes", this means you have to take care of the order of the rules.
Via "Add", a rule can be entered.
|
![Rufnummer-RufNumKonf-neu](rufnummer-rufnumkonf-neu.png)
|
In the upper part of the window, the number to which the rule applies is defined
Apply To
Kind of call number:
Destination = CalledPartyNumber
Originator = CallingPartyNumber
Redirector = RedirectingNumber, DivertedNumber)
Number:
This part of the number is searched for in the table
In the second part, the rule is defined that shall be applied to the call number stated above.
|
Kind of call number:
|
required
|
Call number to be changed:
Destination (CalledPartyNumber)
Originator (CallingPartyNumber)
Redirector (RedirectingNumber, DivertedNumber)
|
Prefix:
|
optional
|
Number / digit in front of the copied part
|
Instruction from which digit on the number shall be copied:
|
optional
|
Copied part of the number. The number contains the first digit to be copied.
Example: Number: 4799584 Prefix: 3 = Copied: 99584
|
Suffix:
|
optional
|
Digits that are added at the end
|
At "Test rule" it can be checked, whether the result is appropriate.
![ex_yellow_sm](ex_yellow_sm.png)
|
The number conversion "lies" on the ISDN-board, this means:
With outgoing messages, an outside line access that might have been entered at the Kernel is added, BEFORE a rule is searched.
When an outside line access is needed, it has to be included in the rule.
|
If rules with multiple conditions are needed, read How To: Advanced Rules for Call Number
|