1. Products
  2. Archive ProCall_Enterprise_7.2
  3. ixi-UMS Kernel Installation and Configuration
  4. ixi-UMS Kernel Configuration
  5. Location - Instance
  6. Controller
  7. Activate/Assign
Back Next  PDF Download PDF

Activate/Assign

If no installed CAPI/controller was detected during the installation, it was installed/configured later or the connection was changed (e.g. from LAN-Capi to VoIP/XCAPI), it can be read out using "Hardware detection".

 

It is displayed how many controllers the detected CAPI provides and how many channels are available per controller.

 

ControllerAktivieren

 

Each controller can be assigned a location and thus be configured for use by ixi-UMS or blocked for use by switching to "Disabled.

 

ex_yellow_sm

If all the detected controllers are on one ISDN-board, no controller must be deleted via "Remove". When only a small number of controllers shall be used, blocked for the use by switching to "Inactive".

 

 

Via Edit with simultaneous marking of the controller the number of available channels can be displayed and edited if desired.

 

Version ProCall_Enterprise_7.2