Location Settings

The phone numbers of the telephone system are defined in the Location Settings

Exension Range
Indicate here which internal phone numbers exist in the phone system. This information is used to determine the available lines from the phone system. The internal phone numbers of the telephone system and the phone number information of a call are used to determine whether it is an internal or an external call. In addition, when lines are generated automatically, estos UCServer checks whether the number of the line to be generated automatically lies within the range of internal numbers. Only then is the line generated by estos ECSTA for Mitel MiVoice 5000 and the TAPI notified.

Location
Indicate here which international phone numbers precede the internal extension numbers.
The input of this location information should only be carried out if you use several driver instances and have connected several telephone systems. This location information can only be configured when the option Use Location is switched on. If you enter a location here, all extension phone numbers are entered fully international.
Example: With location information '49(89)1234' the extension '100' is formatted as '49(89)1234-100'.

Phone Number Format
The phone number registered from the driver at the application can be changed with rules. Moreover, you can also change phone numbers sent by the PC to the telephone system. See Phone number formatting.