estos ECSTA for Mitel MiVoice MX-ONE / BusinessPhone makes available several Telephony Service Providers for Microsoft® Tapi 2.1 (also 2.2 and 3.0). These Tapi drivers produce a central communication between a PC (CTI Server) and the telephone system. On this CTI server all devices on the telephone system are available as Tapi lines.
All estos ECSTA for Mitel MiVoice MX-ONE / BusinessPhone drivers use the efficient interface CSTA in order to communicate with the telephone system.
For the installation and management of the driver see Driver Management.
Supported Telephone Systems
Driver | PBX |
---|---|
ECSTA for Mitel MiVoice MX-ONE CSTA3 XML direct (>V5 SP5) | Mitel MiVoice MX-ONE from V5.0 SP5 |
ECSTA for Mitel MiVoice MX-ONE CSTA3 XML direct (>V5 SP5) | Aastra 700 from V5.0 SP5 |
ECSTA for Mitel MiVoice MX-ONE via ApplicationLink | Mitel MiVoice MX-ONE |
ECSTA for Mitel MiVoice MX-ONE via ApplicationLink | Ericsson MX-ONE |
ECSTA for Mitel MiVoice MX-ONE via ApplicationLink | Ericsson MD110 |
ECSTA for Aastra BusinessPhone | Ericsson BusinessPhone |
ECSTA for Aastra BusinessPhone | Aastra BusinessPhone |
Using the driver in the network
After installing the driver, you may use all configured line devices on the server as TAPI-lines. If you are using a server based CTI Software, you may install it now. To have the TAPI-devices available on all workstations, the TAPI-driver must be distributed in the network. There are the following options:
Version ECSTA_4