estos ECSTA for HiPath 2000/3000/5000 makes available several Telephony Service Providers for Microsoft® Tapi 2.1 (also 2.2 and 3.0). These Tapi drivers produce a central communication between a PC (CTI Server) and the telephone system. On this CTI server all devices on the telephone system are available as Tapi lines.
All estos ECSTA for HiPath 2000/3000/5000 drivers use the efficient interface CSTA in order to communicate with the telephone system.
For the installation and management of the driver see Driver Management.
Supported Telephone Systems
Driver | PBX | Telecom identification |
---|---|---|
ECSTA for HiPath 2000/3000/5000 | Siemens Hipath 3000 (V4.0 - V9.0) | Telekom Octopus F200 / F400 / F600 / F650 (V4.0 - V9.0) |
ECSTA for HiPath 2000/3000/5000 | Siemens Hipath 2000 / 2020 | |
ECSTA for HiPath 2000/3000/5000 | Siemens Hipath 2030 | Telekom Comfort Open / Octopus F270 IT |
ECSTA for HiPath 2000/3000/5000 | Siemens Hipath 5000 | Telekom Octopus F IP-Netpackage |
ECSTA for HiPath 2000/3000/5000 | Siemens Hipath OpenOffice EE | Telekom Octopus F270 IT |
ECSTA for HiPath 2000/3000/5000 | Siemens Hipath OpenOffice ME | Telekom Octopus F450 UC |
Driver | PBX | Telecom identification |
ECSTA for Siemens Hicom 150 | Siemens Hicom 150E (ab V2.2) | Telekom Octopus E10 / E20 / E30 (ab V2.2) |
ECSTA for Siemens Hicom 150 | Siemens Hicom 150H | Telekom Octopus E730 / E930 |
ECSTA for Siemens Hicom 150 | Siemens Hipath 3000 (V1.0 - V6.0) | Telekom Octopus F200 / F400 / F600 (V1.0 - V6.0) |
Driver | PBX | Telecom identification |
ECSTA for Octopus E300/E800 | Telekom Octopus E300 / E800 | Telekom Octopus E300 / E800 |
Using the driver in the network
After installing the driver, you may use all configured line devices on the server as TAPI-lines. If you are using a server based CTI Software, you may install it now. To have the TAPI-devices available on all workstations, the TAPI-driver must be distributed in the network. There are the following options:
Version ECSTA_4