The location settings are used to enable the right dailing and display of phone numbers.
Only the right location settings grants external phone numbers to be dialed and displayed correctly.
This section of the help file will describe the individual configuration parameters on the Location Settings dialog. If a location is depicted, the following pages will provide all information necessary for configuration. If several networked locations must be setup, all information for special configuration scenarios can be found in the Location Designs section.
Location Name
Enter a name for the new location to be setup. The name will be used for display in the system.
Country/region:
Choose your country from this list.
Area code
Enter your local area dialing code here. This is for example 030 for Berlin or 44 for Zurich (Switzerland).
The leading 0 is not necessary and is removed by the system when the settings are saved.
Location is using a PBX
Activate this option, if the location has a telephone system.
Public line type
Please select the type of the public line: DDI trunk line (for Direct Dial-In) or a Multipoint connection line. Sometimes DDI lines are also referred to as DID lines (for Direct Inward Dialing). A DDI line enables external parties to call internal phones directly using phone number ranges. DDI numbers comprise of a PBX base number (addressing the PBX) plus a number range (or several ranges) to address internal phones from outside.
A Multipoint connection typically is used for smaller offices or for home usage. One or more phone numbers (Multi Subscriber Number = MSN) are used in this case. The MSNs may be totally different, e.g. they don't have to use numbering ranges.
PBX base number (only with a PBX using a DDI line)
If you have a DDI line you should enter the PBX base number here. For example if you have the number +1 (30) 12345-222, the PBX base number is 12345.
External access prefix
This is a number you have to dial for an external telephone call. Even if an outside line is automatically requested by a telephone, it may be necessary to enter this number in ProCall. This number will be automatically deleted for dialing as well as for the telephone numbers (default value is 0).
Determine external access prefix...
The wizard will provide support in determining the external access prefix (also known as "external dialing code", "trunk access code" or "outside line access code"). Access to a telephone at the location and an external telephone (cell phone) will be needed. If there is uncertainty about the external dialing code, start the wizard and follow its instructions. All settings for the external dialing code will be set automatically.
Extension phone number format
Displays the international phone number of an extension number at the current location (PBX usage only).
Details...
The Complete Location Settings will be displayed. The dialog can be opened at any time after initial installation using the Location List in the administrator interface.
Version ProCall_Enterprise_7.2