Installation

Before you start the ixi-UMS Kernel setup,

·	an installed version with ixi-UMS Kernel LOWER THAN VERSION 6.00 has to be de-installed completely

·	the ixi-Framework in Version 6.60 or higher has to be installed

·	you have to be logged in with an administrator account

·	the ISDN-board / V-CAPI / XCAPI should be installed and configured (this can also be done subsequently)

The setup contains no configuration wizard.

All the settings have to be performed in the Microsoft Management Console after the installation in the ixi-UMS Kernel Configuration Snap-In.

After the installation, the following settings are active by default:

·	incoming faxes are delivered as PDF and TIFF

·	no printing of incoming messages

It is mandatory to work on the settings in the ixi-UMS Kernel Configuration at Server Site and Hardware after the installation.

With an activated UAC, the setup must be started via "right mouse-click - Execute as Administrator".

Update Installation

Installations with ixi-UMS Kernel 6.00 and higher do not have to be installed again, but can be updated.

Please note the following procedure:

·	Log in with the current service account of the ixi-UMS Kernel

·	Install the latest ixi-Framework 6.60

·	Install the ixi-UMS Kernel 6.60 or higher

·	Basic setting remain untouched

Version ixi-UMS_Enterprise_6.70