Setup for Innovaphone

The Innovaphone IP150, IP110, IP200 und IP230 phones support a phone book in the phone via LDAP.

Setup

1. Data Source
   Configure a Replicator or a Telephone Book.
2. LDAP-nodes
   Configure a new LDAP node named innovaphone from the Database Management. Access to this node can occur using the BaseDN dc=innovaphone. You can configure this LDAP node.

   Authentication	Optional
   Phone Number Formatting	Unformatted Note the location settings for the telephone equipment.
   End Device Support	Innovaphone IP200

3. Phone (firmware V5)
   Start configuring the telephone. You can configure the phone location from Config / Directory.

   Country Code	49 for Germany or 1 for the USA
   Area Code	30 for Berlin or 706 for Toronto
   Domestic Long-distance Code	0 in Germany or 1 in the USA
   International Dialing Code	00 in Germany or 011 in the USA
   Trunk Access Code	The number for dialing numbers external to the phone system (generally 0 in Europe).
   Root Number	The base number for a phone system connection with phone extensions. The root number is 12345 for the phone number, +49(30)12345-678

   You can configure access to the LDAP server from Config / Directory / LDAP from External Servers.

   Enable External LDAP Server Access	Enabled
   IP Address	MetaDirectory's IP address
   Port Number	MetaDirectory's TCP port
   Distinguished Name	Optional User Name
   Password	Optional User Name
   LDAP Mode	Paged Results
   Sort by First LDAP Name Attribute	Enabled
   Base	BaseDn of the LDAP node, e.g. dc=innovaphone
   Object Filter	(objectClass=contactPerson)
   Attribute 1	displayName
   Attribute 2
   Attribute 3
   Phone 1	telephoneNumber
   Phone 2	homePhone
   Phone 3	cell
   Phone 4

4. Phone (firmware V6)
   You will find the configuration of LDAP Directories under Configuration / Registration / Directories.

   Enable External LDAP Server	Enabled
   Server	MetaDirectory's IP Address or Host Name
   Port	MetaDirectory's TCP Port (712)
   User Name	Optional User Name
   Password	Optional User Name
   Search Base	BaseDN for the LDAP node, e.g. dc=innovaphone
   Mode	Paged Results
   Sort Results	Enabled
   Object Filter	(objectClass=contactPerson)
   Name Attributes	displayName
   Number Attributes	telephoneNumber, phoneHome, and mobile
   Hold Server Connection	60