Server Installation

During the server setup, proceed as follows:

1. Check the version of the Mitel PBX system
   The minimun required versions is MCD 4.0.
2. Check operating system
   See Requirements.
3. Configure PBX system
   See PBX system configuration.
4. Run MSI setup
   Run the CSTA Server setup.
5. Configure the connection to the PBX system
   See PBX systems.
6. Configuration of the CSTA Server
   See CSTA Server configuration.
7. Start the CSTA Server Service
   See CSTA Server Service.
8. Finish the installation
   Complete the installation.
9. Install ECSTA for Mitel MiVoice Business
   See also Tapi Driver installation