estos ECSTA for Avaya CS1000 offers multiple Telephony Service Providers for Microsoft® Tapi 2.1 (also 2.2 and 3.0). These Tapi drivers implement a central communication between a Server and the Telephony system (PBX). On this server all devices from the PBX are shown as TAPI lines.
All estos ECSTA for Avaya CS1000 drivers use the powerful CSTA Interface to communicate with the PBX.
Supported PBX systems
All systems of the Avaya Communications Server 1000 / Meridian / Succession family.
|CS 1000||ECSTA for Avaya||CS 2000||ECSTA for Avaya||CS 2100||ECSTA for Avaya|
The driver is installed using a Microsoft® Installer setup.
Multiple PBX systems
If you want to connect multiple CS1000 nodes or different service domains, you can install the driver several times.
This is done using the 'Advanced Phone and Modem Options. This program was installed with the driver and is located in the Control Panel.
Supported Operating systems
These are described in Software requirements.
Using in the network
After installing the driver, you may use all configured line devices on the server as TAPI-lines. If you are using a server based CTI Software, you may install it now. To have the TAPI-devices available on all workstations, the TAPI-driver must be distributed in the network. There are the following options: