By default, a so-called fax header should be printed on every fax to be sent.
The fax header should contain data / time as well as the sender as text and the fax sender ID:
The fax header consists of information from the LANCAPI and ixi-UMS software.
Name and sender number are passed on to the CAPI-interface (e.g. ISDN-board) by the ixi-UMS Business. Date and time are inserted by it.
When deploying a bintec elmeg pe.IP plus you can determine, whether and which of the information shall appear in the header generally.
Please proceed as in the following:
1.Open the web-interface of the Funkwerk Router and log on.
2.Change the view from Standard to SNMP-Browser
3.Open the tab capi in the menu bar on the left side
4.Open the sub item capiConfigTable in the tab capi
5.Scroll to the right and click - Symbol in order to change the settings for the wanted port.
6.Adjust your wanted capiConfigFaxG3Header:
The header as well as the Funkwerk / Bianca fax logo are displayed
The bintec elmeg / Bianca is switched off. The header consisting of date / time from the router and the sender information from the ixi-UMS Kernel are displayed.
If no sender information are deposited at the ixi-UMS Kernel or delivered by the sender, only date and time are displayed in the header:
Neither date / time, nor any other information are printed with the sending.
7.Confirm the configuration with OK.
8.Save the configuration so that it is available when the router has to be restarted.