Advanced Settings

Fees
The fees multiplier enables you to adapt the registered fee information from the telephone system at the driver.

Node numbers
If your PBX system is using node numbers you can enter these numbers semicolon seperated. These node numbers are removed from numbers presented by the pbx.

Emulate blind transfer
If the PBX system does not offer blind transfer the driver can emulate this feature. The driver will setup a consultation transfer which is merged as soon as the called destiation is rings.

Blind transfer timeout
Timeout for the blind transfer emulation. The consultation call must be answered within this timeout. Otherwise the consultation call is canceled and the intial call is retrieved.

CSTA Login
With CSTA Login you may configure the user name, password and PIN for access to the PBX.

  • PIN-Code
    If the access to the PBX is secured with a PIN-Code, enter it here (e.g. 000000)
  • Login using System Password
    The default CSTA-Password is 110797.
  • Login using Username and Password
    Enter a user and a password. That may be 31994 (31994) or AMHOST (77777).

Snapshot for active calls
The driver can validate existing calls. This prevents that calls are displayed on the PC that do no more exist in the PBX system.
Enter a time interval in seconds.
The higher this value the longer it takes for the driver to detect a hanging call. The lower this value the higher is the load on the PBX.

Retry MonitorStart
In the event that the driver cannot start monitoring an extension because, for example, the extension has not been connected to the PBX, the driver will attempt to start monitoring at periodic intervals.
Enter a time interval in seconds.

Trunk Access Codes
Here you may specify the ports for the trunk interfaces. These ports should equal the settings in your Hicom system.

Version 5.0