Configure Network Routing Service

The connection to the telephone system can be made through the Network Routing Service (NRS). This requires the CS1000 node and the ECSTA driver to be configured as Gateway Endpoints in the corresponding Service Domain.

Configuration details for Avaya CS1000 Version 6.5 and earlier versions

  1. Open the Network Routing Service Manager.
    Navigate to the Network Routing Service in CS1000 Element Manager and open the Network Routing Service Manager. Enter user name and password.

  2. Switch to Standby DB view
    In order to add a Gateway Endpoint or to change settings, this must be done in the mode standby DB view.

  3. Navigate to Configuration - Gateway Endpoints
    Select the Service Domain to be used. Press 'Show'.

  4. Check the Gateway Endpoint for the ECSTA Drivers
    You need a Gateway Endpoint to add ECSTA drivers.
    Endpoint Nameecsta (ECSTA Gateway sip URI user part)
    Endpoint authentication enabledNot configured
    Static endpoint address typeIP version 4
    H.323 SupportH.323 not supported
    SIP supportDynamic SIP endpoint
    SIP transportTCP
    SIP port5260 (ECSTA TCP Listen Port)

  5. Save the changes
    Under Tools - Database Actions, run 'Cut over and Commit.'

Configuration details for Avaya CS1000 Version 7.0 and later versions

  1. Open the Networks Routing Service Manager
    Navigate in the CS1000 Element Manager to Network Routing Service and open the Network Routing Service Manager. Log on.

  2. Open the End Points view under Numbering Plans.
    To add a gateway endpoint or to change settings, the Managing mode must be set to the Standby Database Mode. Add a new endpoint under the Gateway Endpoints item.

  3. Configure the new gateway endpoint as follows:
    Endpoint Nameecsta (ECSTA Gateway sip URI user part)
    Endpoint authentication enabledAuthentication off
    Static endpoint address typeIP version 4
    H.323 SupportH.323 not supported
    SIP supportDynamic SIP endpoint
    SIP modeProxy mode
    SIP TCP transport enabledactivate
    SIP TCP port5260 (ECSTA TCP Listen Port)

  4. Save the changes
    Save the settings for the gateway endpoint Execute the Cut Over and then the Commit menu options under System Database.

Version 5.0