ECSTA for Mitel MiVoice Business

ECSTA for Mitel MiVoice Business is a Telephony Service Provider for Microsoft® Tapi 2.1 (also 2.2 and 3.0). This Tapi driver establishes the communication beween a PC (Cti Server) and the PBX system using the CSTA Server for Mitel MiVoice Business. On this Cti Server, all devices of the PBX system are made available as Tapi lines.
ECSTA for Mitel MiVoice Business uses the CSTA protocol to connect to the CSTA Server for Mitel MiVoice Business.

For installation and administration of the driver see Driver management.

When setting up the driver, follow these steps:

  1. Check network connection
    Check connectivity to the CSTA Server for Mitel MiVoice Business (ping hostname / IP address).
  2. Version of the CSTA Server for Mitel MiVoice Business
    CSTA Server for Mitel MiVoice Business and ECSTA for Mitel MiVoice Business should be the same version.
  3. Run driver setup
    Launche the ECSTA for Mitel MiVoice Business installation package to install the driver. The driver is offered for 32 and for 64bit operating systems.
  4. Driver configuration
    Enter the IP address and the IP port to establish a connection to the CSTA Server for Mitel MiVoice Business.
  5. Line configuration
    Add the telephone devices, that the driver should use as Tapi lines.

Version 4.0