TAPI Lines

Enter the lines that the driver should make available through TAPI. The numbers are the internal phone numbers for your devices. The names will be used to display the TAPI lines.
The device ID is necessary, in case several telephones have the same number.

Phone Number Format
The lines can optionally be indicated as an internal phone number, for example 123 or canonical +49(30)12345-123.
You should use canonical phone numbers if you use several instances of Tapi driver and thus switch on several telephone systems at the same time. A canonical phone number consists as follows:
+Country code (prefix) Local prefix-extension
In the dialogue Location You can configure the country code, area code and local dialing prefix.

Load Lines
The available lines are determined automatically from the telephone system.
All phone numbers from the phone system that can be operated from the PC are selected. If several phones have the same phone number, possibly only one of these phones is selected. All other phones must be configured manually.

Manual addition of a line
Give the internal phone number of the telephone. If necessary, give the device ID of the telephone. Optionally a name can also be given.

Device ID
The device ID serves to identify the telephone clearly. This is required if several telephones have the same phone number.

Import text
You can import a list of lines from a text file. The file must begin every line with the phone number. Optionally, the name can also be split with a comma.

Export text
You may export the actual line configuration to a text file.

After the installation of the driver it may be necessary to restart the computer.

Version 4.0