Server Installation

During the server setup, proceed as follows:

  1. Check the version of the Mitel PBX system
    The minimun required versions is MCD 4.0.
  2. Check operating system
    See Requirements.
  3. Configure PBX system
    See PBX system configuration.
  4. Run MSI setup
    Run the CSTA Server setup 'ecstamitelserver.msi'.
  5. Configure the connection to the PBX system
    See PBX systems.
  6. Configuration of the CSTA Server
    See CSTA Server configuration.
  7. Start the CSTA Server Service
    See CSTA Server Service.
  8. Finish the installation
    Complete the installation.
  9. Install ECSTA for Mitel Tapi driver
    See also Tapi Driver installation

Version 4.0