estos ECSTA for Mitel is a CSTA middleware for Mitel PBX systems. This server allows monitoring and control of the telephone devices using the standard CSTA protocol.

estos ECSTA for Mitel uses the Mitel MiTai interface to communicate with the pbx.

CTI applications can monitor and control the Mitel PBX system using this CSTA server.

  • ECSTA for Mitel is a Tapi driver for Microsoft Windows. It allows the monitoring and control of the PBX system using the Microsoft Tapi interface.
  • External CSTA applications may be connected to the server.

CSTA Server for Mitel
For installing the CSTA server see Server Installation.

ECSTA for Mitel
For installation of the Tapi driver see Tapi Driver Installation.

3rd Party CTI

Using in the network
After installing the driver, you may use all configured line devices on the server as TAPI-lines. If you are using a server based CTI Software, you may install it now. To have the TAPI-devices available on all workstations, the TAPI-driver must be distributed in the network. There are the following options:

  1. estos UCServer
    The estos UCServer is a CTI/UCC server software which distributes the telephony informations across the network using a graphical client or a multiline TAPI driver. Workgroups, domains, Active Directory and Terminal Server are supported.
  2. estos CallControlGateway
    The estos CallControlGateway for Lync/OCS is a gateway that connects the TAPI-lines with the Lync/OCS server. This enables the Lync/OCS client to use traditional telephone devices via Remote Call Control (RCC).
  3. Windows Telephony Server
    The Windows Telephony Server is a component of Windows server operating systems since Windows NT. You will need a domain. The service is limited to domain users.

Version 4.0