Siemens Hicom 150

When setting up the driver, follow these steps:

  1. Check whether the version of the telephone system is supported
    See also Support telephone system
  2. Setup the telephone system for CSTA use
    See also Telephone system configuration.
  3. Connect cable
    If connecting with a serial cable, connect it.
  4. Install ISDN controller
    If connecting with S0, install a compatible ISDN controller.
  5. Check network connection
    If the connection is established using TCP/IP, check if you can reach the PBX system (ping hostname)
  6. Driver installation
    See also Settings

Version 4.0