Static Route for TLS

For the TLS communication you must use a Network address (FQDN) in the static route.

Add a static route for the estos CallControlGateway

  1. Start the Live Communications Server-administration-Snap-In.
  2. Extend the panel Microsoft Office Live Communications Server 2005.
  3. Extend the total structure node.
  4. Extend the subordinate node under the node domains, until the domain which contains the pool is found.
  5. Extend the domain node of the pool until the Live Communications-Server and Pools node.
  6. Extend the node Live Communications-Server and -Pools.
  7. Right click to the name of the server or the pool.
  8. Click add on the Routing tab.
  9. Enter the following information:
    Matching URI (Uniform Resource Identifier)
    • User: callcontrol
    • Domain: cti.de
    • Phone URI: off
    Next hop
    • Network Address: e.g. ctiserver.mydomain.de
      Enter the network address of the computer, which the estos CallControlGateway is running on. The network address must match the FQDN of the Server Certificate.
    • Transport: TLS
    • Port: 5071
      This is the standard port of the estos CallControlGateway. If another port was used in the estos CallControlGateway configuration, enter this port.
    • Replace Host in requirement-URI: switched off
    • Select a valid certificate for the Mutual TLS encryption.
  10. Change now to the Host authorization tab. Click on add.
  11. Enter the following information:
    Server
    • Network Address: e.g. ctiserver.mydomain.de
      Enter the same network address used under Routing here. A network address has to be entered.
    Settings
    • Outgoing only: on
    • Restrict server: switched on
    • Treat as authenticated: switched on
  12. Click on OK, on apply and then on OK.

Please note that changing the settings for static routes may require a restart of the LCS.

Version 4.0